MT7620A 300mbps Openwrt 4g Lte Router With Sim Card Slot For Camera
Phone Computer Tablet
What's a 4G router?
4G WiFi router, containing a built-in LTE broadband modem, uses a SIM card to share internet connections.
... It can provide internet connections using a telephone line.
Connect the cables and subscribe to broadband services from DSL
service providers, then you can enjoy a stable and reliable
4G Router Electrical Characteristics:
|Max. LAN Data Rate:867Mbps|
|With Modem Function:No|
|Standards And Protocols:Wi-Fi 802.11ac, Wi-Fi 802.11b, Wi-Fi
802.11g, Wi-Fi 802.11n|
|Wi-Fi Supported Frequency:2.4G|
|Wi-Fi Transmission Standard:802.11ac|
|Wired Transfer Rate:10/100/1000Mbps|
|2.4G Wi-Fi Transmission Rate:300 Mbps|
|Function:FireWall, QoS, VPN|
|Certification:CE FCC ROHS|
|Place of Origin:China|
|Product name:openwrt 4g lte router with sim card slot|
|Interface:4 LAN /1 WAN|
|Antenna:4 Removable 5dBi Antena|
How to choose a 4G router for your business?
There are many 4G routers on the market, offering a wide variety of
features. You need to make sure that the router provides
functionality and flexibility for your solution needed. Here are
the main things to consider when you a compare 4G routers for your
For speed and reliability in a 4G WAN connection, you’ll need a
router that supports more than one cellular connection. This is
usually referred to as multi-SIM. Look out for a router that
The performance and throughput of a Multi-SIM router is ultimately
limited by the number of simultaneous cellular connections it can
support. This is usually referred to by the number of SIMs it can
accommodate. However, be aware of the difference between
connections and SIMs: a router may allow you to insert two SIMs in
case one of them fails, but not be able to use both at the same
time. We normally choose a router with the SIM capacity required
for your expected usage (eg 6 SIMs). Some routers can be stacked to
allow more SIMs (we’ve often used 18 SIMs) in heavy usage
Most routers today support a version of the 4G standards called
Category 4 LTE. Some manufacturers are rolling out support for
Category 6 LTE, which uses two chunks of spectrum rather than one,
to double the theoretical maximum download speeds from 150 Mbps to
300 Mbps. Cat 6 LTE is still being rolled out by the mobile
carriers, so it isn’t available everywhere. However, it’s worth
considering routers that support it, in order to future-proof your
investment. There are a number of interchangeable terms: look for
Cat 6 LTE, LTE-Advanced (aka LTE-A) and 4G+.
A router that can bond (ie combine) the traffic streams from
multiple SIMs into one, will allow you to have a faster, more
reliable connection to your company network. This is essential if
you’re planning to connect a multi-user site to your company
network using 4G WAN, and especially if you need a very reliable
connection for sensitive applications (see Managed Hubs). The
rationale for bonding is primarily to provide a reliable and stable
connection, with performance as a by-product.
Typically found in single-connection routers, SIM failover allows
two SIMs to be inserted, so that the second can be switched-in if
the first fails (or if the first is blocked when usage climbs too
Prioritisation by traffic type
Some routers can be set to optimise the performance of your 4G WAN
connection. They might prioritise (and de-prioritise) different
traffic types. They might route those traffic types over different
cellular connections according to the real-time performance of the
connections (eg latency and reliability of the connection). If you
have performance sensitive applications, or if you are delivering
traffic using performance sensitive applications like Citrix, you
will need these features for optimum results. This is only really
relevant when bonding, because bonding allows you to control
priority in both directions, both to and from the site. If you load
balance on multi-sim, you can only control priority in one
direction (outbound) – you cannot influence the inbound priority.
Some routers will allow you to cache data. When multiple users
access the same intranet pages or stored files, for example,
caching allows them to access it faster and with less data usage.
Other WAN interfaces
Some routers will allow you to connect an additional WAN circuit
that can be used alongside the cellular connections. The rationale
would be to allow the use, where available, of a connection that is
faster, cheaper or has more capacity than the cellular connections.
The additional connection might be a DSL, EFM or satellite circuit,
or perhaps the ability to connect into a WiFi hotspot. It might be
implemented as an Ethernet port, or perhaps a dedicated DSL port.
Some 4G routers provide WiFi, access for users, reducing the need
for additional equipment in small installations. Some will provide
isolated guest access. Some will provide private corporate access
as well a public guest access via a captive portal to enable you to
force guests to provide details about themselves.
Some routers can act as the WiFi controller for a number of WiFi
access points, simplifying WiFi deployment and extending the
coverage in larger installations.
Some router manufacturers use fixed router configurations, keeping
the deployment as simple as possible. Others employ a modular
design in which cards are inserted for the particular application.
For example, two 4G cards might be installed on one occasion and a
4G card plus a DSL card on another. This can be helpful if you
envisage re-using the device in different locations. It can also
allow you to install with 4G and then later to migrate seamlessly
to a fixed circuit (eg DSL or EFM) once that is installed. This is
particularly useful if you need to install rapidly and/or if you
would like to retain the 4G card for backup once a fixed circuit is
installed. See our Rapid Site Deployment for a next day
Power over Ethernet (POE)
Some 4G routers can provide Power over Ethernet, to devices that
are plugged into their Ethernet ports. This allows you to provide
power to Wireless Access Points or IP phones without having to buy
separate power over ethernet switches or power injectors.
Some devices provide detailed reporting on cellular usage,
including information on which devices are driving the usage. This
can be very helpful in managing costs.
What Hardware do we use?
Having explored the features to compare in a 4G WAN router, an
obvious question is: “ What is the best 4G router for business
use?” We have built up a lot of experience from deploying 4G WAN
technology to hundreds and hundreds of sites. Over the years we
have settled on one manufacturer for the majority of our
4G Router Our Company:
1. RY Electronics has over 10 years of experience designing and
manufacturing custom cable assemblies optical fibers cable and antennas router in large or small volumes depending on your
2. Our manufacturing facilities can build just about many types of
custom cable assembly(LVDS cable/Flat cable/RF cable/wire harness)
as well as GPS/WIFI/ISM/GSM/3G/4G antenna and RF connectors.
3. Quality is important for us and for the customer, the client’s
demand is more supreme. We create an easier, less costly and
extremely satisfactory way of business. Striving to achieve
improving results through our continuous innovating and technical
engineer’s effort, we create values to turn the antenna / Cable /
Harness to your exact demand.
4. We guarantee every antenna / Cable / Harness we offered must be
tested by network analyzer / Precision Low Voltage Wire Tester to
ensure the perfect quality before delivery. Cooperated with many
overseas clients from over twenty countries, we will be your ideal
4G Router Product Details:
1. When can I ?
We usually quote within 24 hours after we get your inquiry. If you
are very urgent to get the price, please call us or tell us in your
email so that we will regard your inquiry priority.
2. Do you have stock?
We don’t have stock; we’ll start production after receiving PO.
3.What's information do you need for quoting?
For Cable harness, please advise cable specs, part number, or send
For Connectors, please kindly advise series pins, male or female,
molded, field assembly panel mount type and cable length.
4. What's your payment terms?
100 % T/T before delivery
5. What is your terms of delivery?
We are accept EXW, FOB, CIF, etc. You can choose the one which is
the most convenient or most cost-effective for you.